High Polymer Emulsion
Shale Inhibitor / Viscosifier / Flocculant
Product Description
High Polymer Emulsion contains partially hydrolyzed polyacrylamide / polyacrylate (PHPA) copolymer and is used primarily as a borehole stabilizer to prevent reactive shale and clay from swelling and sloughing. High Polymer Emulsion is also added to low-solids drilling fluids to increase lubricity, fluid viscosity, and to improve carrying capacity of air/foam injection fluids.
Application/Function
  • Can be used in fresh water, seawater, sodium or potassium chloride brines
  • Provides excellent cuttings encapsulation
  • Improves wellbore stability
  • Enhances slurry rheological properties
  • Can be well suited to low-solids, non-dispersed drilling mud systems
  • Reduces fluid loss
Advantages
  • Mixes easily with minimum shear in fresh water
  • Provides effective clay and shale stabilization
  • Non-fermenting
  • Breaks down chemically with household bleach (sodium hypochlorite)
  • Flocculates non-reactive solids in reserve pit at low concentrations
  • Liquid product for easy mixing and rapid yield
  • Prevents bit balling and balling on stabilizers and bottom hole assemblies by coating and lubricating solids
Technical Data
Appearance Thick,opaque white liquid
pH 6.5-7.5
Active matter 30.0%-35.0%
Shipping
Transportation of commodity name is not restricted by international regulatory agencies.
Safe Handling Recommendations
Utilize normal precautions for employee protection when handling chemical products. Use of standard PPE is recommended for employee comfort and safety. See Material Safety Data Sheet (MSDS) prior to use.
Package and Storage
25kg drums or according to customer's requirement.
Avoid high-intensity extreme pressure and prolonged exposure to strong sunlight. Keep bag closed. Keep away from heat, sparks and flames.